Casio AQW100-1AV

Casio AQW100-1AV інструкція користувача

  • 1
    Operation Guide 5028
    Digital Time Daylight Saving Time (DST) Setting
    Daylight Saving Time (summer time) advances the digital time setting by one hour
    from Standard Time. Remember that not all countries or even local areas use Daylight
    Saving Time.
    To toggle the Timekeeping Mode digital time between DST and Standard Time
    1. In the Timekeeping Mode, hold down A until the seconds
    start to flash, which indicates the setting screen.
    2. Press C once to display the DST setting screen.
    3. Press D to toggle between Daylight Saving Time (
    displayed) and Standard Time (
    4. Press A twice to exit the setting screen.
    The DST indicator appears on the Timekeeping, Moon/
    Tide Data, Alarm, and Hand Setting Mode screens to
    indicate that Daylight Saving Time is turned on. In the
    case of the Moon/Tide Data Mode, the DST indicator
    appears on the tide data screen only.
    Seconds DST Hour Minutes
    Day Month Year
    3. When the setting you want to change is flashing, use B and D to change it as
    described below.
    This watch features separate digital and analog
    timekeeping. The procedures for setting the digital time
    and analog time are different.
    The Moon phase indicator shows the current Moon
    phase in accordance with the current date as kept in the
    Timekeeping Mode.
    The tide graph shows tidal movements for the current
    date in accordance with the current time as kept in the
    Timekeeping Mode.
    Be sure to configure the current time and date, and your
    Home Site data (data for the site where you use the
    watch) correctly before using the functions of this watch.
    See “Home Site Data” for more information.
    Getting Acquainted
    Congratulations upon your selection of this CASIO watch. To get the most out of your
    purchase, be sure to read this manual carefully and keep it on hand for later reference
    when necessary.
    The longitude, lunitidal interval, Moon phase indicator and tide graph data that
    appear on the display of this watch are not intended for navigation purposes.
    Always use proper instruments and resources to obtain data for navigation
    This watch is not an instrument for calculating low tide and high tide times. The
    tide graph of this watch is intended to provide a reasonable approximation of
    tidal movements only.
    CASIO COMPUTER CO., LTD. assumes no responsibility for any loss, or any
    claims by third parties that may arise through the use of this watch.
    About This Manual
    Button operations are indicated using the letters shown
    in the illustration.
    For the sake of simplicity, the sample displays in this
    manual do not show the analog hands of the watch.
    Each section of this manual provides you with the
    information you need to perform operations in each
    mode. Further details and technical information can be
    found in the “Reference” section.
    Moon/Tide Data
    Countdown Timer
    Dual Time
    Hand Setting
    Press .
    General Guide
    Press C to change from mode to mode.
    In any mode (except when a setting screen is on the display), press B to illuminate
    the face of the watch.
    Tide graph
    Month – Day
    Moon phase
    Hour : Minutes
    PM indicator
    Day of
    Digital Time and Date
    Use the Timekeeping Mode to set and view a digital display of the current time and date.
    When setting the digital time, you can also configure settings for summer time
    (Daylight Saving Time or DST).
    To set the digital time and date
    1. In the Timekeeping Mode, hold down A until the
    seconds start to flash, which indicates the setting
    2. Press C to move the flashing in the sequence shown
    below to select the other settings.
    To do this:
    Reset the seconds to
    Toggle between Daylight Saving Time (
    ) and
    Standard Time (
    Change the hour or minutes
    Change the year
    Change the month or day
    Do this:
    Press D.
    Press D.
    Use D (+) and B ().
    4. Press A twice to exit the setting screen.
    The first press of A displays the UTC differential setting screen. Pressing A again
    exits the setting screen.
    Resetting the seconds only (without changing the DST, hour, or minute setting)
    causes the analog minute hand setting to be adjusted automatically.
    See Digital Time Daylight Saving Time (DST) Setting below for details about the
    DST setting.
    The day of the week is displayed automatically in accordance with the date (year,
    month, and day) settings.
    DST indicator
    On/Off status
    Home Site Data
    Moon phase, tide graph data, and Moon/Tide Data Mode data will not be displayed
    properly unless Home Site data (UTC differential, longitude, and lunitidal interval) is
    configured correctly.
    The UTC differential is a value that indicates the time difference between a
    reference point in Greenwich, England and the time zone where a city is located.
    The letters UTC is the abbreviation for Coordinated Universal Time, which is the
    world-wide scientific standard of timekeeping. It is based upon carefully maintained
    atomic (cesium) clocks that keep time accurately to within microseconds. Leap
    seconds are added or subtracted as necessary to keep UTC in sync with the Earths
    The lunitidal interval is the time elapsing between the Moons transit over a meridian
    and the next high tide at that meridian. See Lunitidal Interval for more information.
    This watch displays lunitidal intervals in terms of hours and minutes.
    The Site/Lunitidal Interval Data List at the back of this manual provides UTC
    differential and longitude information around the world.
    The following is the initial factory default Home Site data (Tokyo, Japan) when you
    first purchase the watch, and whenever you have the batteries replaced. Change
    these settings to match the area where you normally use the watch.
    UTC differential (+9.0); Longitude (East 140 degrees); Lunitidal interval (5 hours,
    20 minutes)
    To configure Home Site data
    1. In the Timekeeping Mode, hold down A until the
    seconds start to flash, which indicates the setting
    2. Press A again to display the UTC differential setting
    3. Press C to move the flashing in the sequence shown
    below to select other settings.
    East Longitude/
    West Longitude
    Lunitidal Interval
    Lunitidal Interval
    UTC differential
Casio AQW100-1AV

У вас виникло питання стосовно Casio AQW100-1AV?

Кількість запитань: 0

Задайте запитання іншим користувачам Casio AQW100-1AV. Надайте чіткий та вичерпний опис проблеми та свого запитання. Чим детальнішим буде опис проблеми/запитання, тим легше буде іншим користувачам Casio AQW100-1AV надати вам вичерпну відповідь.

Ознайомтеся з безкоштовною інструкцією для Casio AQW100-1AV. Ви ознайомились з інструкцією, але не змогли знайти відповідь на своє запитання? В такому випадку задайте своє запитання іншим користувачам продукції Casio AQW100-1AV на цій сторінці. Введіть ваше запитання тут

Характеристики продукту

Бренд Casio
Модель AQW100-1AV
Продукт Спортивний годинник
EAN 79767897666
Мова Англійська
Тип файлу PDF
Технічні характеристики
Таймер Зворотний відлік
Водонепроникнення до 200
Режим годинника
Точність +/-30
Тип циферблата годинника -
Інші характеристики
Розміри (ШхГхВ) 48.2 x 46 x 14.5
Колір продукту Чорний
Вага та розміри
Вага 54
Матеріал браслету Смола
Тип батарейок SR927W
Кількість батарей 2

Супутні товари

Спортивний годинник Casio


Шукаєте інструкцію? інструкціїкористувача гарантує, що ви знайдете необхідне за лічені секунди. У нашій базі міститься більше 1 мільйона PDF-інструкцій від більш ніж 10 000 торгових марок. Щодня ми додаємо нові версії інструкцій, аби ви завжди могли знайти необхідну саме вам. Усе дуже просто: просто вкажіть назву торгової марки та тип продукції в рядку пошуку, i ви зможете безкоштовно та миттєво переглянути необхідну інструкцію.


© Copyright 2020 інструкціїкористувача Усі права захищено.