Cateye Strada RD200 Cadence

Cateye Strada RD200 Cadence інструкція користувача

(1)
  • MENUMENU
    MENUMENU
    MODEMODE
    MODEMODE
    MODEMODE
    Tire circumference
    reference table
    12 x 1.75
    14 x 1.50
    14 x 1.75
    16 x 1.50
    16 x 1.75
    18 x 1.50
    18 x 1.75
    20 x 1.75
    20 x 1-3/8
    22 x 1-3/8
    22 x 1-1/2
    24 x 1
    24 x 3/4
    Tubular
    24 x 1-1/8
    24 x 1-1/4
    24 x 1.75
    24 x 2.00
    24 x 2.125
    26 x 7/8
    26 x 1
    (
    59
    )
    26 x 1
    (
    65
    )
    26 x 1.25
    26 x 1-1/8
    26 x 1-3/8
    26 x 1-1/2
    26 x 1.40
    26 x 1.50
    26 x 1.75
    26 x 1.95
    26 x 2.00
    26 x 2.10
    26 x 2.125
    26 x 2.35
    26 x 3.00
    27 x 1
    27 x 1-1/8
    27 x 1-1/4
    27 x 1-3/8
    650 x 20C
    650 x 23C
    650 x 35A
    650 x 38A
    650 x 38B
    700 x 18C
    700 x 19C
    700 x 20C
    700 x 23C
    700 x 25C
    700 x 28C
    700 x 30C
    700 x 32C
    700C Tubular
    700 x 35C
    700 x 38C
    700 x 40C
    29 x 2.1
    29 x 2.3
    935
    1020
    1055
    1185
    1195
    1340
    1350
    1515
    1615
    1770
    1785
    1753
    1785
    1795
    1905
    1890
    1925
    1965
    1920
    1913
    1952
    1953
    1970
    2068
    2100
    2005
    2010
    2023
    2050
    2055
    2068
    2070
    2083
    2170
    2145
    2155
    2161
    2169
    1938
    1944
    2090
    2125
    2105
    2070
    2080
    2086
    2096
    2105
    2136
    2146
    2155
    2130
    2168
    2180
    2200
    2288
    2326
    Tire size L (mm)
    MENUMENU
    MODEMODE
    L mm
    AC
    MENU
    MODE
    MODEMODE
    When the computer is
    mounted on the bracket
    5
    6
    9
    8
    2
    1
    3
    4
    7
    3 mm
    1
    9
    4
    9
    6
    9
    3
    5
    5
    2
    2
    1
    2
    1
    8
    8
    4
    9
    44
    6
    33
    5
    5
    3
    Pull
    securely
    Pull
    securely
    Pull securely
    CATEYE STRADA CADENCE
    CYCLOCOMPUTER CC-RD200
    U.S. Pat. Nos. 5236759/6957926 Pat./Design Pat. Pending
    Copyright© 2007 CATEYE Co., Ltd.
    CCRD20-070727 066600520 4
    ENG
    Before using the computer, please thoroughly read this manual and keep it for
    future reference.
    Preparing the computer
    AC
    1
    2
    3
    4
    km/h mph
    Increase
    Move digits
    (by pressing
    & holding)
    Register
    the setting
    Register
    the
    setting
    Clear all data (initialization)
    Press the AC button on the back.
    Select the desired speed units
    Select “ ” or “ ”.
    Enter the tire circumference
    Enter the tire circumference of your bicycle in
    mm.
    * Refer to the tire circumference reference table.
    Set the clock
    When MODE is pressed and held, “Displayed time”,
    “Hour”, and “Minute” will appear, in this order.
    24h
    12h, or
    increase
    the value
    Switch the
    screen or
    move digits
    (by pressing
    & holding)
    Register
    the setting
    (finish)
    Measure wheel circumference (L) of your bike
    To get the most accurate calibration do a wheel roll
    out. With the valve stem perpendicular to the
    ground, mark the pavement at the valve stem. With
    the riders weight on the bike, roll the wheel one tire
    revolution in a straight line and mark the ground
    when the valve stem is perpendicular to the ground
    again. Measure the distance in millimeters. This is
    the most accurate wheel calibration number.
    : Speed unit
    : Wheel size icon
    Push!
    Battery case cover
    Contact
    WARNING / CAUTION
    • Do not concentrate on the computer while riding. Ride safely!
    • Install the magnet, sensor, and bracket securely. Check these periodically.
    • If a child swallows a battery, consult a doctor immediately.
    • Avoid having the computer in direct sunlight for unnecessary or extended periods.
    • Do not disassemble the computer.
    • Do not drop the computer. Doing so may result in a computer malfunction or damage.
    When using the computer installed on the bracket, change the MODE by pressing on the three dots
    below the screen. Pressing hard on other areas can result in malfunction or damage to the computer.
    • Never place the computer on a metal surface. If you do, the contact points will conduct
    electricity, discharging the battery.
    • Tighten the dial on the Flex-Tight bracket by hand only. Over-tightening can damage the bracket
    threads.
    • When cleaning the computer, bracket and sensor, do not use thinners, benzene, or alcohol.
    • Dispose of used batteries according to local regulations.
    • LCD screen may be distorted when viewed through polarized sunglass lenses.
    How to install the unit on your bicycle
    Install the speed sensor and wheel magnet
    Install the sensor and magnet :
    Sensor line
    * When installing cadence sensor 4, insert
    the sensor rubber pad 7 if necessary.
    Magnet
    Sensor
    Magnet
    Sensor
    A
    The magnet should pass
    through the sensor line.
    B
    The clearance between the sensor surface
    and the magnet must not exceed 3 mm.
    1 Bracket band
    2 Bracket
    3 Speed sensor
    4 Cadence sensor
    5 Wheel magnet
    6 Cadence magnet
    7
    Sensor rubber pad
    8 Bracket rubber pad
    9 Nylon ties (x10)
    * After installation, check that the speed sensor and cadence sensor are functioning properly.
    In the case of the speed sensor, lift the rear wheel off the ground and spin the wheel to
    check the speed is displayed.
    In the case of the cadence sensor, press MODE to display C (cadence) on the mode screen.
    Rotate the crank in the non driving direction and check cadence is displayed.
    If the speed is not displayed, check that conditions
    A
    and
    B
    are satisfied.
    While supporting it
    by hand,
    push it out as if lifting
    the front up
    Rear wheel spoke
    Toward the sensor line
    Remove/install the
    computer
    Install the cadence sensor and cadence magnet
    Left crank (Inside)
    Toward the sensor line
    Caution:
    Round off the cut edge of the
    bracket band to prevent injury.
    Cut
    Attach the bracket to the stem or handlebar
    Caution:
    Tighten the bracket, ensuring that the
    cable does not get caught in the stem.
    Stem
    Handlebar
    Caution:
    Tighten the bracket, ensuring that the cable
    does not get caught in the handlebar.
    Route the cable
    Caution:
    Turn the handlebar to make
    sure wire does not hinder full
    rotation.
    When attaching the bracket to the handlebar
    When attaching the bracket to the stem
    Use the nylon tie 9 to secure
    the cable on the frame. Wind
    the cable on the rear brake
    cable as shown.
    Left Chain Stay (Inside)
    Left Chain Stay (Outside)
    Click
Cateye Strada RD200 Cadence

У вас виникло питання стосовно Cateye Strada RD200 Cadence?

Кількість запитань: 0

Задайте запитання іншим користувачам Cateye Strada RD200 Cadence. Надайте чіткий та вичерпний опис проблеми та свого запитання. Чим детальнішим буде опис проблеми/запитання, тим легше буде іншим користувачам Cateye Strada RD200 Cadence надати вам вичерпну відповідь.

Ознайомтеся з безкоштовною інструкцією для Cateye Strada RD200 Cadence. Ви ознайомились з інструкцією, але не змогли знайти відповідь на своє запитання? В такому випадку задайте своє запитання іншим користувачам продукції Cateye Strada RD200 Cadence на цій сторінці. Введіть ваше запитання тут

Характеристики продукту

Загальна інформація
Бренд Cateye
Модель Strada RD200 Cadence
Продукт Велокомп'ютер
EAN 4990173017317
Мова Англійська
Тип файлу PDF

інструкціїкористувача.com.ua

Шукаєте інструкцію? інструкціїкористувача.com.ua гарантує, що ви знайдете необхідне за лічені секунди. У нашій базі міститься більше 1 мільйона PDF-інструкцій від більш ніж 10 000 торгових марок. Щодня ми додаємо нові версії інструкцій, аби ви завжди могли знайти необхідну саме вам. Усе дуже просто: просто вкажіть назву торгової марки та тип продукції в рядку пошуку, i ви зможете безкоштовно та миттєво переглянути необхідну інструкцію.

інструкціїкористувача.com.ua

© Copyright 2020 інструкціїкористувача.com.ua. Усі права захищено.