Sony FMP-X10

Sony FMP-X10 інструкція користувача

  • FMP‑X10
    Media Player
    Reference Guide
    This equipment has been tested and found to comply
    with the limits for a Class B digital device, pursuant to
    Part 15 of the FCC Rules. These limits are designed to
    provide reasonable protection against harmful
    interference in a residential installation. This
    equipment generates, uses, and can radiate radio
    frequency energy and, if not installed and used in
    accordance with the instructions, may cause harmful
    interference to radio communications. However, there
    is no guarantee that interference will not occur in a
    particular installation. If this equipment does cause
    harmful interference to radio or television reception,
    which can be determined by turning the equipment
    off and on, the user is encouraged to try to correct the
    interference by one or more of the following
    Reorient or relocate the receiving antenna.
    Increase the separation between the equipment
    and receiver.
    Connect the equipment into an outlet on a circuit
    different from that to which the receiver is
    Consult the dealer or an experienced radio/TV
    technician for help.
    Compliance with FCC requirement 15.407(c)
    Data transmission is always initiated by software,
    which is the passed down through the MAC, through
    the digital and analog baseband, and finally to the RF
    chip. Several special packets are initiated by the MAC.
    These are the only ways the digital baseband portion
    will turn on the RF transmitter, which it then turns off
    at the end of the packet. Therefore, the transmitter
    will be on only while one of the aforementioned
    packets is being transmitted. In other words, this
    device automatically discontinue transmission in case
    of either absence of information to transmit or
    operational failure.
    Frequency Tolerance: 20ppm
    5.15 – 5.25GHz band is restricted to indoor operations
    FCC Radiation Exposure Statement:
    This equipment complies with FCC radiation exposure
    limits set forth for an uncontrolled environment and
    meets the FCC radio frequency (RF) Exposure
    Guidelines. This equipment should be installed and
    operated keeping the radiator at least 20cm or more
    away from person’s body (excluding extremities:
    hands, wrists, feet and ankles).
    For the State of California, U.S.A. only
    Perchlorate Material: special handling may apply.
    Perchlorate Material: Lithium battery contains
    Important Safety
    1) Read these instructions.
    2) Keep these instructions.
    3) Heed all warnings.
    4) Follow all instructions.
    5) Do not use this apparatus near water.
    6) Clean only with dry cloth.
    7) Do not block any ventilation openings. Install
    in accordance with the manufacturer’s
    8) Do not install near any heat sources such as
    radiators, heat registers, stoves, or other
    apparatus (including amplifiers) that produce
    9) Do not defeat the safety purpose of the
    polarized or grounding‑type plug. A polarized
    plug has two blades with one wider than the
    other. A grounding type plug has two blades
    and a third grounding prong. The wide blade
    or the third prong are provided for your safety.
    If the provided plug does not fit into your
    outlet, consult an electrician for replacement of
    the obsolete outlet.
    10) Protect the power cord from being walked on
    or pinched particularly at plugs, convenience
    receptacles, and the point where they exit from
    the apparatus.
    11) Only use attachments/accessories specified by
    the manufacturer.
    12) Use only with the cart, stand, tripod, bracket, or
    table specified by the manufacturer, or sold
    with the apparatus. When a cart is used, use
    caution when moving the cart/apparatus
    combination to avoid injury from tip‑over.
    13) Unplug this apparatus during lightning storms
    or when unused for long periods of time.
    14) Refer all servicing to qualified service
    personnel. Servicing is required when the
    apparatus has been damaged in any way, such
    as power‑supply cord or plug is damaged,
    liquid has been spilled or objects have fallen
    into the apparatus, the apparatus has been
    exposed to rain or moisture, does not operate
    normally, or has been dropped.
    On placement
    Place the player in a location with adequate
    ventilation to prevent heat build‑up in the
    Do not place the player on a soft surface such as
    a rug that might block the ventilation holes.
    Do not place the player in a location near heat
    sources, or in a place subject to direct sunlight,
    excessive dust, or mechanical shock.
    Do not place the player outdoors, in vehicles, on
    ships, or on other vessels.
    If the player is brought directly from a cold to a
    warm location, or is placed in a very damp room,
    moisture may form on the outer surface and on
    interior of the player.
    Should this occur, the player may not operate
    properly. In this case, leave the player turned on
    for about half an hour until the moisture
    Do not install the player in an inclined position. It
    is designed to be operated in a horizontal
    position only.
    Do not place heavy or unstable objects on the
    Disconnect the AC power cord and all other
    cables from the player when you move the
    Keep the player away from equipment with
    strong magnets, such as microwave ovens, or
    large loudspeakers.
    Do not place metal objects in front or on the
    both sides of the player. It may limit reception of
    radio waves.
    Do not place the player in a place where medical
    equipment is in use. It may cause a malfunction
    of medical instruments.
    If you use a pacemaker or other medical device,
    consult your physician or the manufacturer of
    your medical device before using the wireless
    LAN function.
    About the hard disk drive
    The hard disk has a high storage density, which
    enables quick access to the written data. However,
    it can easily be damaged by shock, vibration or
    dust, and should be kept away from magnets. To
    avoid losing important data, observe the following
    Do not apply a strong shock to the player.
    Do not place the player in a location subject to
    mechanical vibrations or in an unstable location.
    Do not place the player on top of a hot surface,
    such as a VCR or amplifier (receiver).
    Do not use the player in a place subject to
    extreme changes in temperature (temperature
    gradient less than 10 °C/hour).
    Do not move the player with its AC power cord
    Do not disconnect the AC power cord while the
    power is on.
    Do not move the player for one minute after you
    have unplugged the AC power cord.
    Do not attempt to replace or upgrade the hard
    disk by yourself, as this may result in
    If the hard disk drive should malfunction, you
    cannot recover lost data. The hard disk drive is
    only a temporary storage space.
    About repairing the hard disk drive
    The contents of the hard disk drive may be
    checked in case of repair or inspection during a
    malfunction or modification. However, the
    contents will not be backed up or saved by Sony.
    If the hard disk needs to be formatted or
    replaced, it will be done at the discretion of
    Sony. All contents of the hard disk drive will be
    erased, including contents that violate copyright
    On power sources
    Follow the procedure below when disconnecting
    the AC power cord.
    Disconnect the LAN cable or pause the
    download by using the 4K application setting
    in the Application” items of the player home
    Wait for about five minutes after turning the
    player off.
    Make sure that the hard disk drive is not
    operating (the power indicator and HDD
    indicator are off).
    Disconnect the AC power cord.
    Disconnect the player from the wall outlet if you
    are not going to use the player for a long time.
    To disconnect the AC power cord, grasp the plug
    itself; never pull the cord.
    Observe following points to prevent the AC
    power cord being damaged. Do not use the AC
    power cord if it is damaged, as doing so may
    result in an electric shock or fire.
    Do not pinch the AC power cord between the
    player and wall, shelf, etc.
    Do not put anything heavy on the AC power
    cord or pull on the AC power cord itself.
    Owner’s Record
    The model and serial numbers are located at the
    bottom of the unit. Record the serial number in the
    space provided below. Refer to them whenever you
    call upon your Sony dealer regarding this product.
    Model No. FMP‑X10
    Serial No.______________
    To reduce the risk of fire or electric shock, do not
    expose this apparatus to rain or moisture.
    To avoid electric shock, do not open the cabinet. Refer
    servicing to qualified personnel only.
    This symbol is intended to alert the
    user to the presence of uninsulated
    dangerous voltage” within the
    product’s enclosure that may be of
    sufficient magnitude to constitute a
    risk of electric shock to persons.
    This symbol is intended to alert the
    user to the presence of important
    operating and maintenance
    (servicing) instructions in the
    literature accompanying the
    These graphical symbols are located on the AC
    Danger of explosion if battery is incorrectly replaced.
    Replace only with the same or equivalent type.
    Do not expose batteries or appliances with battery‑
    installed to excessive heat, such as sunshine and fire.
    The remote control supplied with this product
    contains a coin/button cell battery. If the coin/button
    cell battery is swallowed, it can cause severe internal
    burns in just 2hours and can lead to death.
    Keep new and used batteries away from children. If
    the battery compartment does not close securely,
    stop using the product and keep it away from
    If you think batteries might have been swallowed or
    placed inside any part of the body, seek immediate
    medical attention.
    The player is not disconnected from the AC power
    source (mains) as long as it is connected to the wall
    outlet, even if the player itself has been turned off.
    Install this unit so that the AC power cord can be
    unplugged from the wall socket immediately in the
    event of trouble.
    The nameplate is located on the bottom of the
    Do not install this player in a confined space, such as
    a bookshelf or similar unit.
    You are cautioned that any changes or modifications
    not expressly approved in this manual could void your
    authority to operate this equipment.
    This transmitter must not be co‑located or operated
    in conjunction with any other antenna or transmitter.
    The shielded Interface cable (LAN cable) must be
    used with the equipment in order to comply with the
    limits for a digital device pursuant to Subpart B of Part
    15 of FCC Rules.
    Printed using VOC (Volatile Organic
    Compound)‑free vegetable oil based ink.
    ©2014 Sony Corporation Printed in Japan 4‑540‑861‑11(1)
    Sony Customer Support
    1‑855476‑6945 (1‑8554Sony4K)
    Please Call Before Returning the Product to
    the Store
Sony FMP-X10

У вас виникло питання стосовно Sony FMP-X10?

Кількість запитань: 0

Задайте запитання іншим користувачам Sony FMP-X10. Надайте чіткий та вичерпний опис проблеми та свого запитання. Чим детальнішим буде опис проблеми/запитання, тим легше буде іншим користувачам Sony FMP-X10 надати вам вичерпну відповідь.

Ознайомтеся з безкоштовною інструкцією для Sony FMP-X10. Ви ознайомились з інструкцією, але не змогли знайти відповідь на своє запитання? В такому випадку задайте своє запитання іншим користувачам продукції Sony FMP-X10 на цій сторінці. Введіть ваше запитання тут

Характеристики продукту

Загальна інформація
Бренд Sony
Модель FMP-X10
Продукт Медіа-плеєр
Мова Англійська
Тип файлу PDF


Шукаєте інструкцію? інструкціїкористувача гарантує, що ви знайдете необхідне за лічені секунди. У нашій базі міститься більше 1 мільйона PDF-інструкцій від більш ніж 10 000 торгових марок. Щодня ми додаємо нові версії інструкцій, аби ви завжди могли знайти необхідну саме вам. Усе дуже просто: просто вкажіть назву торгової марки та тип продукції в рядку пошуку, i ви зможете безкоштовно та миттєво переглянути необхідну інструкцію.


© Copyright 2020 інструкціїкористувача Усі права захищено.